Servicing Connecticut, Western Massachusetts, and Hudson Valley, NY

Kelley "L" Pad Dock Seal with Hood

Features a modular hood-style head curtain that does not over-compress due to extra projection required on similar competitive models. It is equipped with the standard roll-formed galvanized steel framing.

Design Highlights
  • Standard Side Pad Base Projection: 16″
  • Standard Head Member Base Projection: 12″
  • Standard Base Fabric: 22 oz Vinyl
  • Roll Formed, Galvanized Steel Side & Head Pad Backing
  • Available for Door Sizes Up to 10′-0″ Wide
  • Side Pads Include Two Triangular Support Wedges & Bottom Draft Pads
  • Standard Side Pad Penetration: 12″
  • Maximum Side Pad Projection: 24″
  • Standard 4″ Projection Difference Between Side Pads & Head Member -Must Be Maintained for Correct Product Application
  • Increase “Standard” Unit Height by 6″ When 14′ Trucks Are Present (Western States)

Kelley Adjustable Head Pad Dock Seal

Design Highlights
  • Standard Base Projection: 10″
  • Standard Base Fabric: 22 oz Vinyl
  • Roll Formed, Galvanized Steel Side & Head Pad Backing
  • Unit Projection Should Not Exceed Twice the Size of Side Pad Backing
  • See Bracket Chart for Bracket Selection
  • 114″ Minimum Unit Width Recommended
  • 93″ Clear Opening Recommended for Cold Storage Applications – Increase Unit Width by 3″
  • Increase “Standard” Unit Height by 6″ When 14′ Trucks Are Present (Western States)

Kelley Hooded Dock Seal

A hood-style head curtainseals the rear of the vehicle, accommodating a variety of vehicle heights. The Foam Dock Seal with Head Curtain model is ideal for doors that are 9′ high or taller. End caps secure the drop curtain to the side pads. Durable fiberglass stays provide stiffness in the top of the curtain for better moisture drainage.

Design Highlights
  • Standard Base Projection: 10″
  • Standard Base Fabric: 22 oz Vinyl
  • Roll Formed, Galvanized Steel Side & Head Pad Backing
  • Unit Projection Should Not Exceed Twice the Size of Side Pad Backing
See Bracket Chart for Bracket Selection
  • 114″ Minimum Unit Width Recommended
  • 93″ Clear Opening Recommended for Cold Storage Applications – Increase Unit Width by 3″
  • Increase “Standard” Unit Height by 6″ When 14′ Trucks Are Present (Western States)
BROCHURESPEC SHEET

Kelley KI-300 Air Inflatable Dock Seal with One-piece Cover

Design Highlights
  • Standard Projection: 12″
  • Standard Cover Fabric: 10 oz. Vinyl
  • Side & Head Member Backing: 2×8 Pressure Treated Wood
  • Standard Head & Side Member Face Width: 12″
  • Blower Motor: 1/2 HP, 115v with Automatic Reset Thermal Overload Protection (includes NEMA 1 switch)
  • Metal Blower Cover Included
  • 24″ High Guide Stripes at Bottom of Side Members
  • Front Opening Width is Approx. 7′-6″

Kelley KI-400 Air Inflatable Dock Shelter with Peripheral Sides & Variable Height Head Member

Design Highlights
  • Standard Side Member Projection: 24″
  • Side Member Face Width: 12″
  • Side Member Backing: 2×8 Pressure Treated Wood
  • Standard Cover Fabric: 10 oz. Vinyl
  • Standard Head Member Projection is 10″ Greater than Side Member Projection
  • Front of Header Assembly is 2×8
  • Top of Head Frame Has Upward Taper & Requires 2-1/2″ Clearance Above Unit Height
  • Blower Motor: 1/2 HP, 115v with Automatic Reset Thermal Overload Protection (includes NEMA 1 switch)
  • Guide Stripes on Head Storage Curtain on 8′-6″ Centers
  • Head Member Mounting Flanges Require 2″ Clearance on Either Side
  • Head Member Consists Fiberglass Covered Treated Wood Frame Which Supports Integral Torsion Spring-head Bag Assembly (standard head bag drop is 36″ to 48″)

Kelley KI-450 Air Inflatable Dock Shelter with Treated Wood Frames

Design Highlights
  • Standard Frame Projection: 24″ Side Frame / 34″ Head Frame
  • Standard Air Bag Fabric: 10 oz. Vinyl
  • Standard Side & Head Storage Curtain Fabric is 22 oz Vinyl & Includes Fiberglass Stays
  • Head Storage Curtain Includes Yellow Guide Stripes on 8′-6″ Centers
  • Side Curtains Are 16″ Wide; Head Curtain is 26” High at Peak of Head Frame
  • Frames Are Pressure Treated Wood
  • Side Frames Are 2 x 4, Head Frame Has 2″ Rake with
  • 2 x 10 Front & 2 x 6 Back
  • Standard Head Bag Drop is 36″, 42″ or 48″ From Underside of Head Frame.
  • Standard Front Opening Width is 7′-6″
  • Steel Supports Project 5” Greater than Side Frame Projection
  • Includes Foam Filled Draft Pads in Bottom Corner
  • Blower Motor: 1/2 HP, 115V with Automatic Reset Thermal Overload Protection (includes NEMA 1 switch)

Kelley V-Seal

The patented V-Seal is the ideal dock seal for better trailer access. The head pad seals along the top edge of the trailer, while the side pads seal the hinge air gap and provide for better access to the back of the trailer. The V-Seal accommodates trailer widths of 8’6″.

Design Highlights
  • Standard Head Member Base Projection: 10″
  • Roll Formed, Galvanized Steel Side & Head Pad Backing
  • TS-55 Super Fabric WP3 Wear Pleats on Head Member
  • Side Pad Backing Width: 8″ (7-1/2″ Actual)
  • Available for Door Widths Up to 9′-0″
  • Seals Hinge Air Gap on Vehicles with Swing-out Doors & Provides Improved Trailer Access
  • Ultra Seal Side Pad Profiles Designed to Function Over 4″ to 6″ Bumper Protection
  • Increase unit width by 3″ for cold storage applications
  • Increase “Standard” Unit Height by 6″ When 14′ Trucks Are Present (Western States)

Kelley V-Seal® VS Foam Dock Seal with Head Pad

Design Highlights
  • Standard Head Member Base Projection: 10″
  • Roll Formed, Galvanized Steel Side & Head Pad Backing
  • TS-55 Super Fabric WP3 Wear Pleats on Head Member
  • Side Pad Backing Width: 8″ (7-1/2″ Actual)
  • Available for Door Widths Up to 9′-0″
  • Seals Hinge Air Gap on Vehicles with Swing-out Doors & Provides Improved Trailer Access
  • Ultra Seal Side Pad Profiles Designed to Function Over 4″ to 6″ Bumper Protection
  • Increase unit width by 3″ for cold storage applications
  • Increase “Standard” Unit Height by 6″ When 14′ Trucks Are Present (Western States)

Kelley V-Seal® VSH Foam Dock Seal with Head Curtain

The unique modular hood configuration includes extra durable TS-55® Super Fabric curtain, support pads on seamless aluminum tubing for front support, end caps and roll-formed TufSteel® galvanized steel framing.

Design Highlights
  • Standard Head Member Base Projection: 10″
  • Roll Formed, Galvanized Steel Side & Head Pad Backing
  • TS-55 Super Fabric WP3 Wear Pleats on Head Member
  • Side Pad Backing Width: 8″ (7-1/2″ Actual)
  • Available for Door Widths Up to 9′-0″
  • Seals Hinge Air Gap on Vehicles with Swing-out Doors & Provides Improved Trailer Access
  • Ultra Seal Side Pad Profiles Designed to Function Over 4″ to 6″ Bumper Protection
  • Increase Ultra Seal unit width by 3″ for cold storage applications
  • Increase “Standard” Unit Height by 6″ When 14′ Trucks Are Present (Western States)

Kelley VSH Seal

The unique modular hood configuration includes extra durable TS-55® Super Fabric curtain, support pads on seamless aluminum tubing for front support, end caps and roll-formed TufSteel® galvanized steel framing.

Design Highlights
  • Standard Head Member Base Projection: 10″
  • Roll Formed, Galvanized Steel Side & Head Pad Backing
  • TS-55 Super Fabric WP3 Wear Pleats on Head Member
  • Side Pad Backing Width: 8″ (7-1/2″ Actual)
  • Available for Door Widths Up to 9′-0″
  • Seals Hinge Air Gap on Vehicles with Swing-out Doors & Provides Improved Trailer Access
  • Ultra Seal Side Pad Profiles Designed to Function Over 4″ to 6″ Bumper Protection
  • Increase Ultra Seal unit width by 3″ for cold storage applications
  • Increase “Standard” Unit Height by 6″ When 14′ Trucks Are Present (Western States)

Kelley Wear Master Dock Seal

The durable head pad slides up to six inches with the vehicle as it shifts up or down from load weight changes, air-ride suspensions or yard-spotting tractors. This dock seal, constructed of our strongest materials, including roll-formed galvanized steel framing, will enhance seal performance at your loading dock.

Design Highlights
  • Standard Projection Up to 10″
  • Side Pads Have 3” Inside Bottom Flaps
  • Two-Piece Movable Head Pad System with Sliding Front Pad Increases Durability & Service Life of Dock Seal
  • 4″ Exposure Wear Pleats on Side Pads & Head Pad Corners for Protection in Critical Wear Areas
  • 25 oz. Urethane-Coated Base Material Provides Optimum Sliding Surfaces for Maximum Wear Ability
  • Galvanized Steel Backing on Head and Side Pads Reduces Pressure on the Building Wall
  • Self-Drilling Screws through Washers Provide Secure Attachment of Sliding Wear Pleat System
  • Minimum 6″ Bumper Protection Required for Yard Jockey Applications (6″ Steel Face Bumpers Preferred)
  • 114″ Minimum Unit Width Recommended
  • 93″ Clear Opening Recommended for Cold Storage Applications – Increase Unit Width by 3″
  • Increase “Standard” Unit Height by 6″ When 14′ Trucks Are Present (Western States)

Weatherall WSS Dock Seal

Design Highlights
  • Base fabric—Black 22 oz Vinyl. 8” exposure wear pleats are standard on the head pad corners.
  • Kiln Dried, #1 grade, Southern Pine wood framing. g Endurance-tested foam core is continuously bonded to frame surface with flexible, nonflammable adhesive.
  • Resilient, open-celled polyurethane foam keeps original shape and compresses easily.
  • 12” drop curtain.
  • Side pad bottoms are tapered to avoid sagging, pinching and wear.
  • All pads are vented for air and moisture release. g 12” high yellow guide stripes guide drivers to the dock.
  • Heavy-duty, galvanized steel mounting brackets Included.